Job Description<\/p>\n
POSITION PURPOSE<\/p>\n
\tThe purpose of the Technical Manager are tensure that technical services are managed and executed according teach account.<\/p>\n
METHOD STATEMENT<\/p>\n
\tTechnical Managers (TM) will be provided with training on the Broll systems, Concept Evolution (CMMS) and the Broll Management Portal, in order tmanage tasks, approve orders and manage the day tday operations. Concept Evolution (CMMS) and the Broll Portal (Web interface) are twsoftware programs used by Broll tmanage our client requests and service delivery.
\n\tEach Technical Manager will be provided with a Broll cell phone, vehicle and laptop with 3G in order tperform their duties in remote areas and out of office.<\/p>\n
REPORTING LINES<\/p>\n
\tTM will report directly tthe Divisional Technical Manager (DTM) for all scope of works.
\n\tAll correspondence tclient will be channelled through DTM.
\n\tAll discrepancies relating tclient and contractors must be channelled through DTM.
\n\tAny unsafe aspect must be reported tDTM for action, Broll OHS for record keeping.<\/p>\n
VEHICLES<\/p>\n
\tVehicle policy tbe signed and handed tthe Technical Manager. Make sure you familiarise yourself with the policy.
\n\tBroll vehicles are for official work only and nprivate passengers may be transported in a Broll vehicle.
\n\tLog sheets are tbe kept on a daily basis.
\n\tVehicle checks and inspections are tbe done on a weekly basis tensure the vehicle is in a roadworthy condition and any dents or scratches are reported.
\n\tAny vehicle repairs or issues are tbe reported on the Risk Register on BOL.
\n\tThe vehicle policy document will provide more detail on the reporting process.
\n\tBroll vehicles are tbe parked at the Broll premises afterhours and are not utilised as a commuting vehicle for Broll staff.
\n\tNtraveling with any Broll vehicles are allowed without a WI issued ttravel tperform Broll duties. If you dnot have a WI ttravel you cannot travel with the Broll vehicle, this an additional WI for the client request logged.
\n\tSigned copy of the vehicle policy are tbe handed back tthe Divisional Technical manager and or HR.<\/p>\n
ESSENTIAL FUNCTIONS AND BASIC DUTIES<\/p>\n
TECHNICAL SERVICES<\/p>\n
\tThe Technical Manager (TM) needs tensure that the services are managed and provided in accordance with the SLA signed between Broll and the client.<\/p>\n
Management of client request\/incident<\/p>\n
\tAll requests\/incidents are logged via the Broll CMMS system \u2013 Concept Evolution.
\n\tThe Contractor is tbe managed on a daily basis in Concept Evolution by the TM, tensure that work are attended tand completed on time.
\n\tAll comments\/events are tbe added on the system on a daily basis with regards twork in progress, and the client must be informed that attention is given tthe request\/incident.
\n\tThe TM has tensure that all detail of the request\/incident is recorded on Concept Evolution events\/comments, sthat ninformation gets lost.<\/p>\n
SLA time lines<\/p>\n
\tSLA time lines are measured in accordance with the agreed priority assigned tthe problem description associated tthe call received.
\n\tThe TM has tensure that the calls are managed within these agreed SLA time lines. If the SLA time line cannot be achieved, then Concept Evolution must be updated with comments via an Event entry, with the reason for failure.
\n\tThe Technical Manager must manage SLA progress reporting provided via Concept Evolution, as well as continuously managing the system, tensure that target completion dates of all open WI are managed before the set target completion dates and times fall due. If a set target date and time is missed, it constitutes a failed SLA for that call.
\n\tIt is the responsibility of the TM tensure that the end-to-end process is followed tachieve completion and closure of each WI, and managing the various LOC [level of completion] stages and progress on the call.
\n\tIt is the responsibility of the TM taction and close all WI\u2019s before the set SLA timelines fall due.
\n\tIn following up and closing all calls within the set SLA timelines, the TM is assisted by the Broll National Call Centre, however the TM remains responsible for the management of the contractor work activities and performance during the process.<\/p>\n
Site inspections are tbe done on a regular basis and in accordance with the SLA<\/p>\n
\tAll sites are tbe visited as issued by Divisional Technical manager, and all priority sites as incidents occur.
\n\tAll sites visits must be logged as WI\u2019s on Concept Evolution and the relevant system application must be used tcapture all relevant data at each visit. (Down load APP)
\n\tAll site condition audits and store inspections must be captured on the Mobile Audit APP and saved tthe \u2018cloud\u2019.
\n\tDuring these site visits the TM must report tthe site security, sign in the visitor book, as well as introduce himself tthe store manager. On leaving the premises, he must sign out again.
\n\tOnce the inspection is completed, the TM must report back tthe store manager, as well as on his findings during the inspection.
\n\tAll findings during the inspection are tbe logged\/reported on Concept Evolution, and subsequently actioned tachieve resolution.(Quoted or actioned WI)
\n\tAll site inspections and audits are tbe captured on the applicable Mobile APP in order tensure electronic recordkeeping and reporting of all audits, and tensure an end-to-end process on findings and subsequent WI\u2019s logged as follow up actions tthe findings.
\n\tRoute planning for site inspections needs tbe co-ordinated with the Divisional Technical Manager, tensure optimised time management and cost.<\/p>\n
Asset Management ( Implemented at later Stage)<\/p>\n
\tAs tthe latest IS[international organization for standards], the FM standard is built from the asset you manage. It is therefore imperative that each TM must ensure that each site he manages has a full asset register that is verified and updated with each visit.
\n\tBroll is responsible for asset tagging and management of the client\u2019s assets.<\/p>\n
The equipment types which must be tagged (in line with the SLA):<\/p>\n
\tElectrical distribution
\n\tHVAC and Refrigeration
\n\tCooling towers \u2013 all types
\n\tStandby plants \u2013 that belongs tClient only
\n\tVertical transport \u2013 not limited tonly escalators and lifts (government certificate numbers used that are displayed on units)
\n\tFire-fighting equipment.(register)
\n\tTanks external.
\n\tRoller shutter doors.
\n\tBakery equipment
\n\tDeli Equipment
\n\tBakery equipment
\n\tFish shop equipment
\n\tFire Panel
\n\tAlarm system
\n\tPlant visor
\n\tPlant room
\n\tFire equipment valves
\n\tBackup fridges & freezers
\n\tScales
\n\tConveyers
\n\tPallet jacks
\n\tLadders
\n\tUPS system
\n\tTills
\n\tAlone standing fridges (clients property)
\n\tWine section \u2013 fridge
\n\tThe Technical Manager is responsible ttag and create all new assets, and verify and audit all existing assets on site, by using the Mobile Asset APP that in turn updates all created and verified asset information in Concept Evolution.
\n\tAll changes tequipment or assets (MAC – Movements, Additions, Changes), detected during site visits and falling within the Asset Tagging scope, have tbe updated on the Mobile Asset APP and verified on the APP at the same time.
\n\tThe Asset Administrator will ensure that the Quality Verification process on changed assets\/asset data is performed in Concept Evolution, but the TM must inform the Asset Administrator of all new stores being tagged and verified, and all existing stores being verified.
\n\tIt is the responsibility of the TM tensure that all Corrective work invoices, Quotes and Service sheets are checked for the correct asset allocation and the applicable asset number, submitted by the contractor with the invoice. Any reports of asset numbers missing or that could not be found, must be followed up with the account manager and rectified as soon as possible.
\n\tThe TM\u2019s must ensure that any asset labels missing on assets, or where the asset label and the WI (PPM\u2019s) don\u2019t match, as reported by the contractor while doing the work, is dealt with in a reasonable time frame, either as an ad-hoc instance or scheduled in their next site visit tthe specific store.
\n\tIf the same instances are detected by the TM himself while doing an inspection, he must re-tag the asset immediately or investigate the asset discrepancy, by liaising with the Asset Administrator.<\/p>\n
Contractor management<\/p>\n
\tBroll staff can dany site inspections or contractor management without a WI issues tdso. The Broll office support\/ call centre will provide you with a WI in order for you to perform your duties if you cannot log the call yourself.
\n\tThe TM needs tensure that the services provided by the contractor are in line with the client\u2019s expectations, and are executed in accordance with approved quotes and within the agreed scope of services.
\n\tThe TM needs tensure that the work executed on site, was correctly quoted by the contractor and correctly paid for by Broll \u2013 original quoted invoices are required by the client.
\n\tThe TM must dat least one job observation per service provider per month on work performed by the service providers.( As per APP)
\n\tDocumentation needs tbe submitted by the TM tprovide proof of job observations done, and this must be done via the Mobile APP facility.
\n\tContractor Works Inspections need tbe done on all work exceeding R 25 000.00 per job, before the invoice from the service providers can be approved by the TM. Any work under R25 000.00 per job must alsbe inspected and audited on an ad-hoc basis, and this inspection can be after the fact.
\n\tIt is the responsibility of the TM tensure that all approved invoices and quotes, contain\/ reference the asset number, and that ninvoices are processed without an asset number provided.
\n\tThe TM needs tbuild a relationship of honesty and trust with their contractors. The Broll business is only as good as the service that they receive from their service providers.
\n\tThe TM must make sure that all safety compliance are adhered to, and they are entitled tperform checks on contractor safety files, and request the applicable qualifications of service providers.
\n\tThe TM must report on any unsafe conditions during job observations and site inspections through their reporting structures, and further ensure that their findings are captured on the site inspection document or on the Mobile Audit APP.
\n\tThe TM needs tensure that all steps are taken treduce cost, reduce breakdowns and implement improved business practices and processes to further reduce cost.
\n\tBroll staff is allowed treceive personal favours or financial benefits from service providers.
\n\tAny poor performance or bridge of business ethics from service providers needs tbe reported tDivisional Technical Manager and supply chain [Nicky Schmidt] that the performance issues can be dealt with factually.
\n\tAdditional service provider requirements needs tbe reported tsupply chain sthat support can be given tthe TM, tprovide vetted service providers.
\n\tTM may not get involved in service provider costing and vetting as corporate governance guidance needs tbe applied through supply chain support \u2013 managed by Nicky Schmidt.
\n\tFixed fees have been set with service providers linked tequipment type. Broll supply chain will manage the service provider allocations, based on regions, costing and turnaround time.<\/p>\n
Work approval<\/p>\n
\tThe TM will approve all work done and invoices submitted by contractors on the Broll Portal, and check that service sheets are scanned with a store stamp and signed off. This approval must be done within a three day cycle from time of invoice submittal, as the approval by the TM will have an effect on payment timelines for the contractor.
\n\tThe Broll office support will manage all PPM work schedules and costing approval. All technical findings on the PPM service sheets will be scrutinized by the Broll office support staff. If any findings are reported by the service providers, then the Broll admin support will forward the findings tthe relevant TM sthat the TM can tlog a WI for the remedial work tbe done.
\n\tIt is the responsibility of the Technical Manager tapprove all Corrective work completed on the Portal. It is imperative that the Technical Manager confirms that the invoice amount and WI number match the contractor information captured on the Portal, and that the job cards are scanned with a store stamp and signed off. Ninvoice can be approved unless the Technical Manager ensures it is 100% correct, and matches all the supporting documentation.
\n\tOnly once the client has approved the submitted and recommended quotes, the TM\/Call Centre may inform the contractor tproceed with the work. Emergency approvals can be obtained from Divisional Technical Manager telephonically, and must be confirmed via e mail the following working day.
\n\tWhere the client requires PO\u2019s [Purchase orders] before any work is done, the TM need tensure that nwork gets done without a Pfrom the client.<\/p>\n
Site allocation<\/p>\n
\tEach TM will be responsible tmanage the client sites allocated thimself. The sites allocated tTM\u2019s are not cast in stone, and the TM\u2019s can change sites allocated tthem if they can prove that it will improve time management and route planning of scheduled visits. These changes in the route planning process must be done in liaison and with the support from the Divisional Technical Manager.
\n\tIt is the responsibility of each TM tmanage the end-to-end process this allocated sites. This implies that even if work was managed or done by another party, the TM is still responsible for the site, and therefore needs tensure that the work is completed on time and according tQuality Management Principles and OHSA Compliance.
\n\tThe TM must report any changes tsites, closing or equipment, ttheir direct line management and the CMMS Data Admin. When the TM is on leave he must ensure tdelegate his approvals and outstanding work tthe Technical Manager that has been requested tstand in for him.
\n\tThe Broll TM are tensure that any new site or site closing down are done according tthe site take-on and site handover process. This includes but not limited to, store inspection, asset verification, equipment baseline audit and equipment commissioning, handover and equipment handback.
\n\tIt is the responsibility of the Broll TM tensure that all PPM services are done tstandard and that the service providers that offer the service are aware of the accountability tensure lifecycle management of the equipment.
\n\tThe Broll client agreement and the client lease agreement with the landlord must support the services we offer. The client lease agreement require Broll tprovide proof that the PPM services were done on time and at the set standard tensure the equipment are maintained correctly sthat the landlord will have enough proof that the failure occurred due tnormal wear & tear and not through poor maintenance.
\n\tBroll will be held liable for the cost if sufficient proof cannot be provided.<\/p>\n
Client feedback and Internal reporting process<\/p>\n
\tBroll staff (Channelled through Divisional Technical Manager)
\n\tMake sure that all communication tthe client is done in a professional manner.
\n\tCheck spelling and grammar before e-mails are sent internally or externally. Never forward any internal Broll mails texternal clients or service providers.
\n\tAlways keep the client and service providers informed of the status of outstanding work, and the progress made tdate as well as the committed action plan, time and date for completion.
\n\tKeep record of all communication and make sure you can provide proof of action steps taken on issues or request.
\n\tDnot get involved in discussing operational issues with the client, store manager or client office staff. These issues must be discussed with\/escalated tthe Broll reporting line management tresolve.
\n\tDiscuss any personal or operational issues with their reporting line management. The issue will be escalated and tabled with the Account Manager, should they not receive the desired outcome.
\n\tDnot bypass the reporting lines, and always manage the issue at hand and not the individual.
\n\tKeep and maintain a log sheet every day for the use of the Broll vehicle, and submit the completed log sheet tthe Account Manager \/ Broll fleet management on the first day of each month. Broll vehicles are for official use only and the Broll vehicle policy applies tthe use of all vehicles.
\n\tIf you are in doubt about any process or support system, please contact your office support staff sthat Broll can support you with the training and or support required.
\n\tBroll staff are issued with a company cell phone and are therefore required, due tthe nature of the business, tmake themselves available at all times tsupport the business. Should you not be available for some reason, then you need tmake prior arrangements with the supporting staff tensure after hour issues will be addressed.
\n\tWorking hours are as tthe company policy, but business requirements will dictate your availability twork afterhours as and when srequired.
\n\tBroll client and business requirements will determine where and how Broll will utilise staff tsupport the business. Broll staff will thus not be dedicated ta single Broll account, but will be utilised toptimise the service deliver tBroll clients.<\/p>\n
Scope of work<\/p>\n
As a TM you are not allowed to execute the following unless qualified to do so:<\/p>\n
Work on the following<\/p>\n
\tElectrical equipment \u2013 only inspect as per training received.
\n\tConveyers
\n\tFridges
\n\tPanels (fire, Alarm etc.) you observe and report.
\n\tFire equipment.
\n\tValves.
\n\tVertical transport
\n\tThe principal of value added must be adhered to.<\/p>\n
PERFORMANCE MEASUREMENTS<\/p>\n
\tAll Junior \/Technical Managers work from Monday tFriday 08h00 \u2013 16h30 or 07h00 \u2013 16h00. TM\u2019s are expected tbe on call 24\/7 [Broll cell phone provided] tattend tany emergency calls that cannot be managed by the Broll Call Centre.
\n\tTechnical Managers are expected tmanage their workflow on a daily basis tensure all work requests are attended to, managed and completed within the set SLA time frames.
\n\tThe Technical Managers will be measured on the KPI\u2019s and metric set out in the FM Procedure documents pertaining teach client (PCD, SOP, PTD documents).
\n\tTechnical Managers report tthe office on Mondays, and \/ or must attend toperational meetings when srequested. When the Technical Manager is not out for site inspections, then reporting tthe office for normal working hours Monday will apply. Working from home is only allowed toptimize travel time when doing site inspections directly from home, and is a privilege tbe managed as a cost saving process
\n\tThe Technical Manager will report tthe Technical Operations Manager and accounts managers.
\n\tThe TM is expected tbe dressed professionally each day and his conduct should at all times reflect the values and image of Broll.
\n\tPromotion from a Junior Technical position ta Technical manager can only be applicable should the TM obtain his legal qualifications in either an HVAC, refrigeration or electrical trade test.<\/p>\n
EDUCATION\/CERTIFICATION:<\/p>\n
\tGrade 12
\n\tTechnical experience.
\n\tTrade test refrigeration trade test required for Technical managers position
\n\tExperience in the FM environment and good communications skills, ability tmotivate and support staff, be a team contributor and support.
\n\tDriver\u2019s license<\/p>\n
OHS CERTIFICATION:<\/p>\n
\tOHS Act N85 of 1993 Section
\n\t8.2 & e.
\n\tConstruction Regulation Sec. 7g
\n\t(The above mentioned training certification can be done through broll).
\n\t*Bonus add if applicant has the above mentioned certification Occupational Medical
\n\tIntroduction tOHS Act
\n\tConstruction Regulations
\n\tWorking @ heights
\n\tBasic fire fighting<\/p>\n
REQUIRED KNOWLEDGE:<\/p>\n
\tMust have computer skills, know and or understand IT management systems, how tdreporting, and conduct meetings.<\/p>\n
EXPERIENCE REQUIRED:<\/p>\n
\tA minimum of 5 years’ experience with 2 years in a supervisory\/management role.<\/p>\n
SKILLS\/ABILITIES:<\/p>\n
\tWell organized and detail oriented.
\n\tGood attention tdetail and accuracy.
\n\tCooperative and willing tassist others.
\n\tExcellent Communication Skills
\n\tAdministration Skills
\n\tDependable
\n\tExcellent Computer Skills
\n\tFlexible
\n\tGood Interpersonal Skills
\n\tAble tuse PC, calculator, and other basic business machines.
\n\tMust be able tfunction without supervision.<\/p>\n
Apply via company website ( N \/ A ) or<\/p>\n
broll.simplify.hr<\/p>\n
<\/p>\n","protected":false},"author":2,"featured_media":0,"template":"","meta":{"_promoted":"","_job_location":"","_application":"http:\/\/broll.simplify.hr","_company_name":"Broll","_company_website":"http:\/\/N%20\/%20A","_company_tagline":"Our purpose is to be the leading real estate services provider and the preferred place of employment for our industry\u2019s professionals. This purpose promotes constant innovation and service excellence, whilst providing end-to-end real estate solutions to our valued clients. Our mission is to build ... read morea high-performance, respectful and dynamic culture that enables professional real estate services, driven through trusted internal and external relationships.","_company_twitter":"","_company_video":"","_filled":0,"_featured":0,"_remote_position":0,"_job_salary":"","_job_salary_currency":"","_job_salary_unit":""},"job_listing_region":[11],"job-types":[12],"class_list":["post-21659","job_listing","type-job_listing","status-expired","hentry","job_listing_region-gauteng","job-type-full-time"],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/job-listings\/21659","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/job-listings"}],"about":[{"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/types\/job_listing"}],"author":[{"embeddable":true,"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/users\/2"}],"wp:attachment":[{"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/media?parent=21659"}],"wp:term":[{"taxonomy":"job_listing_region","embeddable":true,"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/job_listing_region?post=21659"},{"taxonomy":"job_listing_type","embeddable":true,"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/job-types?post=21659"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}