MAIN FUNCTIONS OF THE JOB<\/p>\n
Oversight of Maintenance Including Risk Management<\/p>\n
\tOversee all planned and corrective maintenance activities for fire detection and suppression systems, ensuring that all work is carried out in accordance with applicable SANS standards, manufacturer requirements, and site-specific procedures. Ensure that full cause-and-effect testing is performed at prescribed intervals and meets the required technical standards.
\n\tAct as the technical authority for fire systems during maintenance, testing, impairments, and system modifications, and interface with relevant local authorities and regulatory bodies, including fire consultants and engineers, fire authorities, insurers, certification bodies, and ASIB.\u00a0Act as the technical authority for all installed system impairments, ensuring risks are assessed, mitigated, approved, and systems are safely reinstated in live environments.<\/p>\n
Fire Detection & Alarm Systems<\/p>\n
\tOversee the inspection, testing, maintenance and fault-finding of fire alarm systems and control panels.
\n\tInterrogate fire alarm control panels to validate alarms, faults, configurations, and overall system status.
\n\tReview and validate loop drawings, cause-and-effect matrices, and fire system layouts.
\n\tEnsure manual call point testing is conducted in accordance with applicable standards, site procedures, and required testing intervals.<\/p>\n
Passive Fire Protection<\/p>\n
\tOversee the inspection, testing, and maintenance of passive fire protection systems, including fire doors, fire curtains, fire dampers, and fire-rated building fabric.
\n\tEnsure all passive fire protection elements remain compliant with applicable standards, approved designs, and site-specific requirements.
\n\tEnsure effective fire sealing is maintained in all areas to support room integrity and system performance.<\/p>\n
Fire Fighting Equipment<\/p>\n
\tOversee the inspection, testing, and maintenance of fire-fighting equipment, including hose reels, fire extinguishers, and fire blankets.
\n\tEnsure equipment is correctly located, clearly identified, serviceable, and compliant with relevant standards and statutory requirements.<\/p>\n
Water-Based Fire Suppression Systems<\/p>\n
\tOversee the maintenance, testing, and operational readiness of water-based fire suppression systems, including sprinkler systems (wet and dry pipe), fire pumps (electric and diesel), fire protection valves and valve sets, bulk water storage tanks, and nitrogen compressors for dry pipe and pre-action systems.
\n\tEnsure all water-based fire suppression systems are maintained and tested in accordance with applicable SANS standards, OEM requirements, and approved site procedures.
\n\tVerify correct operation of fire pumps, including duty\/standby changeover, pressure and flow performance, alarms, and interlocks.
\n\tEnsure the integrity and availability of bulk water storage, including capacity, redundancy, monitoring systems, and associated alarms.
\n\tOversee the inspection and testing of sprinkler heads, pipework, valves, and ancillary components to confirm system integrity and operational readiness.<\/p>\n
Gas Suppression Systems<\/p>\n
\tOversee the maintenance, testing, and operational readiness of gas suppression systems, including FM-200, Novec 1230, and Inert gas systems.\u00a0(Inergen and Argonite systems)
\n\tEnsure correct cylinder pressures, system integrity, discharge controls, release logic, and interlocks are maintained and fully operational.
\n\tConfirm that all gas suppression system maintenance and testing activities are conducted in accordance with applicable SANS standards, OEM requirements, and approved site procedures.
\n\tOversee and verify room integrity testing to ensure enclosure suitability and effective agent retention.
\n\tOversee the operation and testing of gas purge and post-discharge ventilation systems to ensure safe and compliant system operation.<\/p>\n
Vesda & Early Warning Detection<\/p>\n
\tOversee the maintenance, testing, and performance of aspirating smoke detection (VESDA) and other early warning fire detection systems.
\n\tReview and verify airflow performance, sampling pipe integrity, alarm thresholds, and detector performance to ensure reliable early detection.
\n\tEnsure correct system configuration, sensitivity settings, and zoning in accordance with protected area risk profiles, applicable standards, and site-specific requirements.<\/p>\n
Fire System Performance and Compliance.<\/p>\n
\tReview and approve maintenance records, test reports, and compliance documentation to ensure accuracy and completeness.
\n\tIdentify non-compliances, risks, or deficiencies and drive timely corrective actions to closure.
\n\tSupport audits and inspections, ensuring full compliance with applicable standards and regulatory requirements.
\n\tEnsure accurate and up-to-date as-built documentation, drawings, and fire system records are maintained.
\n\tSupport and enforce Permit to Work (PTW) and Method Statement compliance for all fire system-related activities.
\n\tCoordinate effectively with service providers, contractors, consultants, and internal stakeholders.
\n\tProvide technical guidance, oversight, and mentoring to technicians and operational teams.<\/p>\n
Training, Mentorship & Knowledge Transfer<\/p>\n
\tProvide targeted training to site technicians on fire system best practices, and work with the L&D Manager to design and deliver programmes that enhance fire system competency across the organisation.
\n\tDevelop operational guidelines, engineering notes, and technical references to support consistent fire system protection and operation.
\n\tCreate, review, and refine fire system simulation scenarios, ensuring all teams regularly complete emergency-response exercises and remain proficient in required response protocols.<\/p>\n
Provide Technical Support to Operations<\/p>\n
\tClose the skills gap between service providers and Teraco Operations by critically evaluating service-provider recommendations, validating proposed repairs, and supporting technicians with complex fault investigations.
\n\tDeliver specialist fire system support to all regional operations teams, ensuring consistent technical guidance across the national estate.
\n\tAct as an expert user of Teraco\u2019s Building Management Systems to ensure maximum operational insight and value.
\n\tCollaborate with BMS teams and site management to develop meaningful dashboards and reporting tools that highlight performance trends and identify improvement opportunities for each facility.<\/p>\n
QUALIFICATIONS AND EXPERIENCE<\/p>\n
\tRelevant technical qualification or trade background (Electronic, Fire Detection Systems, Fire suppression systems, etc or similar).
\n\tSAQCC, ASIB and other similar qualifications will be advantageous
\n\tProven experience overseeing fire system maintenance in complex or critical facilities.
\n\tStrong working knowledge of SANS fire standards and applicable regulations.<\/p>\n
Demonstrated experience with:<\/p>\n
\tFire alarm control panels (interrogation, fault analysis)
\n\tCause & effect testing
\n\tGas suppression systems
\n\tVESDA \/ aspirating smoke detection
\n\tAbility to read, interpret, and validate fire system drawings, schematics, and documentation.
\n\tStrong technical judgement and compliance mindset.<\/p>\n
go to method of application \u00bb<\/p>\n
Apply via company website ( http:\/\/www.teraco.co.za ) or<\/p>\n
<\/p>\n","protected":false},"author":2,"featured_media":0,"template":"","meta":{"_promoted":"","_job_location":"","_application":"","_company_name":"Teraco","_company_website":"http:\/\/www.teraco.co.za","_company_tagline":"Teraco is the first provider of resilient, vendor neutral data environments in South Africa. Clients benefit from the cost savings and improved resilience of securely housing their information systems and networking equipment in a colocation facility purpose-built and operated to global best practic... read moree by an expert organisation with an absolute focus on data centre technology and infrastructure. Founded in 2008, Teraco Data Environments has brought international best practice in vendor neutral data centre management to South Africa to give businesses a technically superior, physically safer and lower cost environment for their information systems. Teraco operates facilities in Rondebosch - Cape Town (CT1), Riverhorse Valley - Durban (DB1) and Isando - Johannesburg (JB1) . Teraco data centres are located on the fibre rings of the major licensed carriers in South Africa, including Telkom, Neotel, Broadband Infraco and Dark Fibre Africa all of which have fibre nodes within the facilities. Teraco Campus Isando Johannesburg","_company_twitter":"","_company_video":"","_filled":0,"_featured":0,"_remote_position":0,"_job_salary":"","_job_salary_currency":"","_job_salary_unit":""},"job_listing_region":[11],"job-types":[12],"class_list":{"0":"post-31286","1":"job_listing","2":"type-job_listing","3":"status-publish","4":"hentry","5":"job_listing_region-gauteng","7":"job-type-full-time"},"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/job-listings\/31286","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/job-listings"}],"about":[{"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/types\/job_listing"}],"author":[{"embeddable":true,"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/users\/2"}],"wp:attachment":[{"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/media?parent=31286"}],"wp:term":[{"taxonomy":"job_listing_region","embeddable":true,"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/job_listing_region?post=31286"},{"taxonomy":"job_listing_type","embeddable":true,"href":"https:\/\/jobs.dataaxisnode.com\/southafrica\/wp-json\/wp\/v2\/job-types?post=31286"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}